Product ID:055 DULL FINISH ENRICH POLYURETHANE VARNISH BRUSH ON
MSDS Date:01/03/1995
FSC:8010
NIIN:00F021197
MSDS Number: BMLGM

TRU-TEST MANUFACTURING COMPANY

201 JANDUS ROAD
CARY, IL 60013

Emergency Phone: 800-228-5635/847-639-5383

Info Phone: 847-639-5383/800-228-5635

Cage: TRUTE

TRU-TEST MANUFACTURING CO

CARY, IL 60013 US

Telephone: 708-639-5383

Cage: TRUTE

KEROSENE (PETROLEUM), HYDROTREATED (C10-C15 SATURATED

CAS: 64742-47-8

RTECS: OA5504000

Fraction By Weight: 48-58%

XYLENE, DIMETHYLBENZENE, XYLOL (IARC - GROUP 3) *96-1*

CAS: 1330-20-7

RTECS: ZE2100000

Fraction By Weight: 1-3%

OSHA PEL 100 PPM

ACGIH TLV: 100 PPM, SKIN

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SEVERE EYE IRRITATION &
DRYING OF SKIN. EXCESSIVE INHALATION CAUSES HEADACHE, DIZZINESS &
NAUSEA.
Explanation of Carcinogenicity:NONE
Effects of Overexposure:MAY CAUSE SEVERE EYE IRRITATION & DRYING OF
SKIN. EXCESSIVE INHALATION CAUSES HEADACHE, DIZZINESS & NAUSEA.

First Aid:EYES: FLUSH W/LARGE AMOUNTS OF WATER. SKIN: WASH W/SOAP &
WATER. INHALATION: REMOVE TO FRESH AIR. USE CPR IF NECESSARY.
INGESTION: DON'T INDUCE VOMITING. KEEP PERSON WARM & QUIET. OBTAIN
MEDICAL ATTEN TION IN ALL CASES.

Flash Point:105F
Lower Limits:0.9
Extinguishing Media:FOAM, CO2, DRY CHEMICAL, WATER FOG
Fire Fighting Procedures:TREAT AS A VOLATILE LIQUID FIRE. WATER SPRAY
MAY BE INEFFECTIVE. IF WATER IS USED, FOG NOZZLES ARE PREFERED.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO EXTREME HEAT.

Spill Release Procedures:ELMINATE IGNITION SOURCES. CONTAIN LEAK,
ABSORB LIQUID W/CLAY, SAND/FLOOR ABSORBENT. PREVENT RUN-OFF TO
SEWERS, STREAMS OR OTHER BODIES OF WATER.

Handling and Storage Precautions:KEEP AWAY FROM HEAT, SPARKS & OPEN
FLAMES. FOR STORAGE CONDITIONS SEE OSHA 1910.106. CONTAINERS SHOULD
BE GROUNDED WHEN POURING.
Other Precautions:DON'T TAKE INTERNALLY. AVOID PROLONGED CONTACT
W/SKIN. AVOID FREE FALL OF MORE THAN 2-3 INCHES WHEN POURING.

Respiratory Protection:USE NIOSH/MSHA JOINTLY APPROVED AIR SUPPLIED
RESPIRATOR IF TLV LIMITS ARE EXCEEDED. APPROVED MECHANICAL FILTER
TO REMOVE SOLID AIRBORNE PARTICLES OF OVERSPRAY DURING APPLICATION.
Ventilation:SUFFICIENT MECHANICAL (GENERAL/LOCAL EXHAUST) TO MAINTAIN
EXPOSURE Protective Gloves:REQUIRED
Eye Protection:SAFETY GLASSES
Other Protective Equipment:IMPERVIOUS CLOTHING & BOOTS TO PREVENT
PROLONGED/REPEATED SKIN CONTACT.
Work Hygienic Practices:WASH HANDS BEFORE EATING, SMOKING OR USING
BATHROOM. DON'T REUSE CONTAMINATED CLOTHING.
Supplemental Safety and Health

Boiling Pt:B.P. Text:300-380F
Vapor Density:>1
VOC Pounds/Gallon:525
Evaporation Rate & Reference:SLOWER THAN ETHER
Percent Volatiles by Volume:60%

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS
Stability Condition to Avoid:HEAT, SPARKS, OPEN FLAMES
Hazardous Decomposition Products:CO2 & CO

Waste Disposal Methods:CONTAMINATED ABSORBENT MAY BE DISPOSED OF IN A
LANDFILL IN ACCORDANCE W/LOCAL, STATE & FEDERAL REGULATIONS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.